FS Tool Series 560
FS Tool Carbide Tipped Saw Blade: Edge Banding Saw Blades

Design:
• Tooth configuration: see chart below (tooth shape & hook angle)
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For trimming projecting edge bandings of solid wood, wood veneer and plastics
• On single and double-sided edge banding machines
FS Tool Series 1TL
FS Tool Carbide Tipped Saw Blade: Segmented Hogging Units

Design:
• Hogger body made of light alloy equipped with 4 or 6 segments and one saw blade, all TC tipped, repalceable and resharpenable
• Standrad chipping width 30 cm, wider chipping widths in multiples of 30cm can be acheived by adding mutilple elements which must be specifed when ordering

Application:
• For Chip free sizing of panel materails on double-ened tenoners and triming machines
FS Tool Series 1TL2
FS Tool Carbide Tipped Saw Blade: Hogging Units With Disposable Knifes

Design:
•High tensile strength steel body with soild carbide reversiable inserts.
• Inserts have 4 cutting edges with chip breaker.
• Chipping width available from 19.2mm and wider, in increments of 15mm

Application:
• For chip-free sizing of panel materials on double-ened tenoners and trimming machines
FS Tool Series L4D
FS Tool Carbide Tipped Saw Blade: Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side

Design:
• Tooth configuration: 3 beveled one side & 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately)

Application:
• For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
• On double cut-off machines and single or double end tenoners
FS Tool Series L6D
FS Tool Carbide Tipped Saw Blade: Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side

Design:
• Tooth configuration: 3 beveled one side & 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately)

Application:
• For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
• On double cut-off machines and single or double end tenoners
FS Tool Series LHCS
FS Tool Carbide Tipped Saw Blade: Saw Blades For Cordless Machines

Design:
• Cutting material: TC
• Expansion slots: laser, self plug

Application:
• For cross cutting solid wood, veneered and plastic laminated sheets
• On portable machines
FS Tool Series LHGA
FS Tool Carbide Tipped Saw Blade: General Application Saw Blades

Design:
• Cutting material: TC
• Expansion slots: laser, self plug

Application:
• For ripping and general cross cutting of dry solid woods
• On portable machines and table saws
FS Tool Series LHRS
FS Tool Carbide Tipped Saw Blade: Demolition-Firemans Saw Blades

Design:
• Tooth configuration: TCGN
• Cutting material: TC
• Modified grind and 15 degrees negative hook reduces the possibility of tooth damage

Application:
• For rough cutting applications
• On gasoline powered machines
FS Tool Series LNM
FS Tool Carbide Tipped Saw Blade: Non-Melt Saw Blades, TC2

Design:
• Tooth configuration: TC2
• Tooth geometry specifically designed to minimize “melting” of material
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For “non-melt” fine cuts in acrylic sheets, selrins, ABS (cycolac), Styrenes and PVC
• On table saws, sliding table saws and vertical panel sizing saws
FS Tool Series S4D
FS Tool Carbide Tipped Saw Blade: XL4000 Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side

Design:
• Tooth configuration: 3 beveled one side and 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately)

Application:
• For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
• On double cut-off machines and single or double end tenoners
FS Tool Series S6D
FS Tool Carbide Tipped Saw Blade: XL4000 Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side

Design:
• Tooth configuration: 3 beveled one side and 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately)

Application:
• For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
• On double cut-off machines and single or double end tenoners
FS Tool Series SS1
FS Tool Carbide Tipped Saw Blade: XL4000 Solid Surface Saw Blades, TC2

Design:
• Tooth configuration: TC2
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For fine sizing cuts in single or double laminated panels, plexiglass and solid surface materials such as Wilsonart® Gibraltar®, SSV®; Corian®; Surell®; Avonite®; Fountainhead®, etc.
• On table saws, sliding table saws, radial arm saws and vertical panel sizing saws