FS Tool Series L01
FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades for Plastic

Design:
• Tooth configuration: TC2
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For fine sizing cuts in single or double laminated panels, plexiglass and solid surface materials such as Wilsonart® Gibraltar®, SSV®; Corian®; Surell®; Avonite®; Fountainhead®, etc.
• On table saws, sliding table saws, radial arm saws and vertical panel sizing saws
• “Non-Melt” saw blades see LNM series
FS Tool Series L03
FS Tool Carbide Tipped Saw Blade: Cross Cut Saw Blades

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
• On table saws, sliding table saws and cut-off saws
FS Tool Series L03TK
FS Tool Carbide Tipped Saw Blade: Thin Kerf Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood and veneered plywoods
• Not recommended to cut stock over ¾” without the use of stabilizer flanges
FS Tool Series L04
FS Tool Carbide Tipped Saw Blade: Standard Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For general cut-off and trimming of soft and hardwoods, plywood and composite panel materials, wood veneered (single sided), or (double sided) using a pre-scoring unit
• On table saws, sliding table saws and cut-off saws
FS Tool Series L06
FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials
On table saws, sliding table saws and cut-off saws
FS Tool Series L09
FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For fine sizing cuts in single or double sided melamine panels, MDF, OSB and HDF panels
• On table saws, sliding table saws and vertical panel sizing saws
FS Tool Series L10
FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For fine sizing cuts in single or double sided melamine panels, MDF, OSB and HDF panels
• On table saws, sliding table saws and vertical panel sizing saws
FS Tool Series L19
FS Tool Carbide Tipped Saw Blade: Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC
• Expansion slots: CU plugged

Application:
For cross cutting and ripping soft and hardwoods, composite materials plastic laminated (single sided)
On table saws, sliding table saws and cut-off saws
FS Tool Series L23
FS Tool Carbide Tipped Saw Blade: Standard Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit
• On table saws, sliding table saws and cut-off saws
FS Tool Series LHCF
FS Tool Carbide Tipped Saw Blade: Chip-Free Melamine Trim Blades

Design:
• Tooth configuration: High ATB (30 degrees)
• Cutting material: TC
• Expansion slots: Laser, Self plug

Application:
• For chip free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring
• For fine cross-cuts in solid woods
• On table saws, sliding table saws, vertical panel sizing saws and cut-off saws
FS Tool Series LHFC
FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades

Design:
• Cutting material: TC
• Expansion slots: laser, self plug

Application:
• For fine cut-off and trimming of solid woods, plywood, wood veneered and plastic laminated panel materials
• On portable machines and table saws
FS Tool Series LHSC
FS Tool Carbide Tipped Saw Blade: Mitre Joint Saw Blades, ATB

Design:
• Tooth configuration: 4 ATB & 1 Raker
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as P.V.C. substrates
• For aluminum cuts see L1A, L1B, L1C series page E36, E37
• On single or double cut-off mitre machines and radial arm saws
FS Tool Series S03
FS Tool Carbide Tipped Saw Blade: XL4000 Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
• On table saws, sliding table saws and cut-off saws
FS Tool Series S04
FS Tool Carbide Tipped Saw Blade: XL4000 Fine Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials
• On table saws, sliding table saws and cut-off saws
FS Tool Series S06
FS Tool Carbide Tipped Saw Blade: XL4000 Fine Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials
• On table saws, sliding table saws and cut-off saws
FS Tool Series S09
FS Tool Carbide Tipped Saw Blade: XL4000 Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
• On table saws, sliding table saws and cut-off saws
FS Tool Series S10
FS Tool Carbide Tipped Saw Blade: XL4000 Fine Cross Cut Saw Blades, TCG

Design:
• Tooth configuration:TCG
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For fine sizing cuts in single or double sided melamine panels, MDF, OSB and HDF panels
• On table saws, sliding table saw and vertical panel sizing saws
FS Tool Series S19
FS Tool Carbide Tipped Saw Blade:XL4000 Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods
• On table saws, sliding table saws and cut-off saws
FS Tool Series S23
FS Tool Carbide Tipped Saw Blade: XL4000 Standard Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit
• On table saws, sliding table saws and cut-off saws