FS Tool Series L02
FS Tool Carbide Tipped Saw Blade: Rip Saw Blades with Chip Limiters, Flat Top

Design:
• Tooth configuration: Flat Top
• Cutting material: TC
• Expansion slots: CU plugged
• Saw body with chip thickness limiters

Application:
• For ripping dry soft and hardwoods
• On table saws and sliding table saws
• Ideal for hand fed operations
FS Tool Series L03
FS Tool Carbide Tipped Saw Blade: Cross Cut Saw Blades

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
• On table saws, sliding table saws and cut-off saws
FS Tool Series L03TK
FS Tool Carbide Tipped Saw Blade: Thin Kerf Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood and veneered plywoods
• Not recommended to cut stock over ¾” without the use of stabilizer flanges
FS Tool Series L04
FS Tool Carbide Tipped Saw Blade: Standard Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For general cut-off and trimming of soft and hardwoods, plywood and composite panel materials, wood veneered (single sided), or (double sided) using a pre-scoring unit
• On table saws, sliding table saws and cut-off saws
FS Tool Series L06
FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials
On table saws, sliding table saws and cut-off saws
FS Tool Series L07
FS Tool Carbide Tipped Saw Blade: Radial Arm Saw Blades, ATB

Design:
Tooth configuration: 4 ATB & 1 Raker
Cutting material: TC
Expansion slots: CU plugged
0° hook angle reduces the tendency of the blade grabbing the material

Application:
• For cross cutting and ripping dry soft and hardwoods
• On radial arm saws and other saws where the blade is above the work piece
FS Tool Series L09
FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For fine sizing cuts in single or double sided melamine panels, MDF, OSB and HDF panels
• On table saws, sliding table saws and vertical panel sizing saws
FS Tool Series L12
FS Tool Carbide Tipped Saw Blade: Gang Rip Saw Blades with Chip Limiters, Flat Top

Design:
• Tooth configuration: Flat Top
• Cutting material: TC
• Expansion slots: CU plugged
• Saw body with chip thickness limiters

Application:
• For ripping dry soft and hardwoods
• On gang-rip saws
FS Tool Series L13
FS Tool Carbide Tipped Saw Blade: Gang Rip Saw Blades with 2 Rakers, Flat Top

Design:
• Tooth configuration: Flat Top
• Cutting material: TC
• Two tungsten carbide rakers

Application:
• For ripping soft and hardwoods, dry up to 15% wood moisture
• On gang-rip saws with one or two shafts
FS Tool Series L14
FS Tool Carbide Tipped Saw Blade: Gang Rip Saw Blades with 2+2 Rakers, Flat Top

Design:
• Tooth configuration: Flat top
• Cutting material: TC
• Two chip clearance rakers and two wiper slots

Application:
• For ripping soft and hardwoods, wet or frozen
• On single and gang-rip saws with one or two shafts
FS Tool Series L18
FS Tool Carbide Tipped Saw Blade: Heavy Duty Rip Saw Blades, Flat Top

Design:
• Tooth configuration: Flat Top
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For ripping dry soft and hardwoods
• On table saws or gang-rip saws with one or two shafts
FS Tool Series L19
FS Tool Carbide Tipped Saw Blade: Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC
• Expansion slots: CU plugged

Application:
For cross cutting and ripping soft and hardwoods, composite materials plastic laminated (single sided)
On table saws, sliding table saws and cut-off saws
FS Tool Series L21
FS Tool Carbide Tipped Saw Blade: Standard Rip Saw Blades, Flat Top

Design:
• Tooth configuration: Flat Top
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For ripping dry soft and hardwoods
• On table saws or gang-rip saws with one or two shafts
FS Tool Series L21TK
FS Tool Carbide Tipped Saw Blade: Thin Kerf Rip Saw Blades, Flat Top

Design:
• Tooth configuration: Flat Top
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For ripping dry soft and hardwoods
• On table saws or gang-rip saws
FS Tool Series L22
FS Tool Carbide Tipped Saw Blade: Glue Line Rip Saw Blades TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC
• Expansion slots: CU plugged
 
Application:
• For glue line ripping dry soft and hardwoods
• Extra smooth cut for gluing applications
• On straight line rip saws, gang-rip saws and table saws
FS Tool Series L2A
FS Tool Carbide Tipped Saw Blade: Glue Line Rip Saw Blades ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For glue line ripping dry soft and hardwoods
• Extra smooth cut for gluing applications
• On table saws
FS Tool Series L4D
FS Tool Carbide Tipped Saw Blade: Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side

Design:
• Tooth configuration: 3 beveled one side & 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately)

Application:
• For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
• On double cut-off machines and single or double end tenoners
FS Tool Series L55
FS Tool Carbide Tipped Saw Blade: Combination Saw Blades, ATB

Design:
• Tooth configuration: 4 ATB & 1 Raker
• Cutting material: TC
• Four ATB teeth and one raker with deep gullet allow for deeper cuts and improved chip-flow

Application:
• For cross cutting and ripping soft and hardwoods, plywood and particleboard
• On table saws, sliding table saws and cut-off saws
FS Tool Series L6D
FS Tool Carbide Tipped Saw Blade: Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side

Design:
• Tooth configuration: 3 beveled one side & 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately)

Application:
• For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
• On double cut-off machines and single or double end tenoners
FS Tool Series LHCP
FS Tool Carbide Tipped Saw Blade: Combination/Planer Saw Blades

Design:
• Tooth configuration: 4 ATB & 1 Raker
• Cutting material: TC
• Four ATB teeth and one raker with deep gullet allow for deeper cuts and improved chip flow

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood and particleboard
• On portable machines and Table saws
FS Tool Series LHCS
FS Tool Carbide Tipped Saw Blade: Saw Blades For Cordless Machines

Design:
• Cutting material: TC
• Expansion slots: laser, self plug

Application:
• For cross cutting solid wood, veneered and plastic laminated sheets
• On portable machines
FS Tool Series LHFC
FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades

Design:
• Cutting material: TC
• Expansion slots: laser, self plug

Application:
• For fine cut-off and trimming of solid woods, plywood, wood veneered and plastic laminated panel materials
• On portable machines and table saws
FS Tool Series LHSC
FS Tool Carbide Tipped Saw Blade: Mitre Joint Saw Blades, ATB

Design:
• Tooth configuration: 4 ATB & 1 Raker
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as P.V.C. substrates
• For aluminum cuts see L1A, L1B, L1C series page E36, E37
• On single or double cut-off mitre machines and radial arm saws
FS Tool Series LM4
FS Tool Carbide Tipped Saw Blade: Mitre Joint Saw Blades, ATB

Design:
• Tooth configuration: 4 ATB & 1 Raker
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as P.V.C. substrates
• For aluminum cuts see L1A, L1B, L1C series page E36, E37
• On single or double cut-off mitre machines and radial arm saws
FS Tool Series LM6
FS Tool Carbide Tipped Saw Blade: Mitre Joint Saw Blades, ATB

Design:
• Tooth configuration: 4 ATB & 1 Raker
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as P.V.C. substrates
• For aluminum cuts see L1A, L1B, L1C series page E36, E37
• On single or double cut-off mitre machines and radial arm saws
FS Tool Series LM6-30°
FS Tool Carbide Tipped Saw Blade: Chip-Free Melamine Trim Blades, High ATB (30°)

Design:
• Tooth configuration: High ATB (30°)
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For chip-free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring
• For fine cross cuts in solid woods
• On table saws, sliding table saws, vertical panel sizing saws and cut-off saws
FS Tool Series S03
FS Tool Carbide Tipped Saw Blade: XL4000 Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
• On table saws, sliding table saws and cut-off saws
FS Tool Series S04
FS Tool Carbide Tipped Saw Blade: XL4000 Fine Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials
• On table saws, sliding table saws and cut-off saws
FS Tool Series S06
FS Tool Carbide Tipped Saw Blade: XL4000 Fine Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials
• On table saws, sliding table saws and cut-off saws
FS Tool Series S07
FS Tool Carbide Tipped Saw Blade: XL4000 Radial Arm Saw Blades, ATB

Design:
• Tooth configuration: 4 ATB & 1 Raker
• Cutting material: TC XL4000
• Expansion slots: CU plugged
• 0° hook angle reduces the tendency of the blade grabbing the material

Application:
• For cross cutting and ripping dry soft and hardwoods
• On radial arm saws and other saws where the blade is above the work piece
FS Tool Series S09
FS Tool Carbide Tipped Saw Blade: XL4000 Cross Cut Saw Blades, ATB

Design:
• Tooth configuration: ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
• On table saws, sliding table saws and cut-off saws
FS Tool Series S19
FS Tool Carbide Tipped Saw Blade:XL4000 Cross Cut Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For cross cutting and ripping dry soft and hardwoods
• On table saws, sliding table saws and cut-off saws
FS Tool Series S21
FS Tool Carbide Tipped Saw Blade: XL4000 Heavy Duty Rip Saw Blades, Flat Top

Design:
• Tooth configuration: Flat Top
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For ripping dry soft and hardwoods
• On table saws or gang rip saws with one or two shafts
FS Tool Series S22
FS Tool Carbide Tipped Saw Blade: XL4000 Glue Line Rip Saw Blades, TCG

Design:
• Tooth configuration: TCG
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For glue line ripping dry soft and hardwoods
• Extra smooth cut for gluing applications
• On straight line rip saws, gang rip saws and table saw
FS Tool Series S4D
FS Tool Carbide Tipped Saw Blade: XL4000 Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side

Design:
• Tooth configuration: 3 beveled one side and 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately)

Application:
• For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
• On double cut-off machines and single or double end tenoners
FS Tool Series S55
FS Tool Carbide Tipped Saw Blade: XL4000 Combination/Planer Saw Blades, ATB

Design:
• Tooth configuration: 4 ATB & Raker
• Cutting material: TC XL4000
• Four ATB teeth and one raker with deep gullet allow for deeper cuts and improved chip-flow

Application:
• For cross cutting and ripping dry soft and hardwoods, plywood and particleboard
• On table saws, sliding table saws and cut-off saws
FS Tool Series S6D
FS Tool Carbide Tipped Saw Blade: XL4000 Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side

Design:
• Tooth configuration: 3 beveled one side and 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately)

Application:
• For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
• On double cut-off machines and single or double end tenoners
FS Tool Series SM6
FS Tool Carbide Tipped Saw Blade: XL4000 Mitre Joint Saw Blades, ATB

Design:
• Tooth configuration: 4 ATB & 1 Raker
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates
• For aluminum cuts see L1A, L1B, L1C, series
• On single side or double cut-off mitre machines and radial arm saws
FS Tool Series SM6-30°
FS Tool Carbide Tipped Saw Blade: XL4000 Chip-Free Melamine Trim Blades, High ATB (30°)

Design:
• Tooth configuration: High ATB (30°)
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For chip-free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring
• For fine cross cuts in solid woods
• On table saws, sliding table saws, vertical panel sizing saws and cut-off saws