FS Tool Series 527
FS Tool Carbide Tipped Saw Blade: Conic Scoring Saw Blades

Design:
• Tooth configuration: Conical ATB
• Cutting material: TC XL4000
• Expansion slots: CU plugged

Application:
• For pre-scoring in plastic laminated sheets
• On panel sizing saws with pre-scoring units
FS Tool Series 528
FS Tool Carbide Tipped Saw Blade: Split Scoring Saw Blades, Flat Top

Design
• Tooth configuration: Flat Top
• Cutting material: TC
• Two piece unit adjustable to the kerf of the main saw blade with the use of shims

Application
• For pre-scoring in plastic laminated sheets
• On table saws, sliding table saws and panel sizing saws with controllable pre-scoring units
FS Tool Series 529
FS Tool Carbide Tipped Saw Blade: Left Hand Scoring Saw Blades

Design:
• Tooth configuration: Unilaterally right
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For pre-scoring in solid wood, veneered and plastic laminated sheets
• On single or double end tenoners with pre-scoring units, in combination with hogging units
FS Tool Series 530
FS Tool Carbide Tipped Saw Blade: Right Hand Scoring Saw Blades

Design:
• Tooth configuration: Unilaterally left
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For pre-scoring in solid wood, veneered and plastic laminated sheets
• On single or double end tenoners with pre-scoring units, in combination with hogging units
FS Tool Series 531
FS Tool Carbide Tipped Saw Blade: Flat Top Scoring Saw Blades, Flat Top

Design:
• Tooth configuration: Flat Top
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For pre-scoring in plastic laminated sheets
• On single or double end tenoners with pre-scoring units, in combination with hogging units
FS Tool Series 560
FS Tool Carbide Tipped Saw Blade: Edge Banding Saw Blades

Design:
• Tooth configuration: see chart below (tooth shape & hook angle)
• Cutting material: TC
• Expansion slots: CU plugged

Application:
• For trimming projecting edge bandings of solid wood, wood veneer and plastics
• On single and double-sided edge banding machines
FS Tool Series 53DL
FS Tool Carbide Tipped Saw Blade: Standard Dado Sets

Design:
• Standard Set adjustable from 1/4'' to 13/16'' in 1/16'' increments.  Consists of two outside saw blades 1/8'' kerf, 1/4'' chipper; two 1/8'' chippers and one 1/16'' Chipper

Application:
• To Cut grooves and dados in soft and hardwoods, plywood and veneered panels
• Used on Table saws, sliding table saws, and single or double end tenoners
FS Tool Series 53DLS
FS Tool Carbide Tipped Saw Blade: Saftey Dado Sets Antikickback Design

Design:
• Standard Set adjustable from 1/4'' to 13/16'' in 1/16'' increments.  Consists of two outside saw blades 1/8'' kerf, 1/4'' chipper; two 1/8'' chippers and one 1/16'' Chipper

Application:
• To Cut grooves and dados in soft and hardwoods, plywood and veneered panels
• Used on Table saws, sliding table saws, and single or double end tenoners
FS Tool Series 54DL
FS Tool Carbide Tipped Saw Blade: Fine Dado Sets

Design:
• Standard Set consists of two outside saw blades 1/8'' kerf, one 1/4'' chipper; two 1/8'' chippers and one 1/16'' Chipper
• Hook Angle 0º

Application:
• To Cut grooves and dados in plastic laminated panels
• Groove widths adjustable from 1/4'' to 13/16'' maximum width in 1/16'' increments. Wider grooves can be obtained by adding spare chippers.
• Used on table saws, sliding table saws, and single or double end tenoners
FS Tool Series 5G
FS Tool Carbide Tipped Saw Blade: Grooving Saw Blades

Design:
• Tooth configuration: Flat top
• Cutting material: TC

Application:
• For cutting grooves in soild wood, plywood, veerned and plastic laminated panels
• ON table saws, sliding table saws, single or double end tenoners and CNC routers