Laminated Panels
 |
FS Tool Series L01 FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades for Plastic Design: • Tooth configuration: TC2 • Cutting material: TC • Expansion slots: CU plugged Application: • For fine sizing cuts in single or double laminated panels, plexiglass and solid surface materials such as Wilsonart® Gibraltar®, SSV®; Corian®; Surell®; Avonite®; Fountainhead®, etc. • On table saws, sliding table saws, radial arm saws and vertical panel sizing saws • “Non-Melt” saw blades see LNM series |
 |
FS Tool Series L23 FS Tool Carbide Tipped Saw Blade: Standard Cross Cut Saw Blades, TCG Design: • Tooth configuration: TCG • Cutting material: TC • Expansion slots: CU plugged Application: • For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit • On table saws, sliding table saws and cut-off saws |
 |
FS Tool Series L41 FS Tool Carbide Tipped Saw Blade: Hollow Face Saw Blades, TCH Design: Tooth configuration: TCH (face hollow-ground) Cutting material: TC Expansion slots: CU plugged Application: • For exceptionally smooth cuts (on both sides) in melamine and other laminated panels, without the need for pre-scoring • On table saws, sliding table saws and vertical panel sizing saws |
 |
FS Tool Series L42 FS Tool Carbide Tipped Saw Blade: Hollow Face Saw Blades, Hollow Ground Design: • Tooth configuration: inverted “V” (face hollow-ground) • Cutting material: TC • Expansion slots: CU plugged Application: • For exceptionally smooth cuts (on both sides) in melamine and other laminated panels, without the need for pre-scoring • For mitre cuts in wrapped styrene picture frames • On table saws, sliding table saws, vertical panel sizing saws and mitre saws |
 |
FS Tool Series L4D FS Tool Carbide Tipped Saw Blade: Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side Design: • Tooth configuration: 3 beveled one side & 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately) Application: • For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit • On double cut-off machines and single or double end tenoners |
 |
FS Tool Series L50 FS Tool Carbide Tipped Saw Blade: XL4000 Panel Sizing Saw Blades, ATB Design: • Tooth configuration: ATB • Cutting material: TC XL4000 • Expansion slots: Cu plugged Application: • For sizing cuts in veneered particle board, hard fiberboard, raw MDF panels and high-density plywood in single sheets and stacks • On panel sizing saws (Beam Saws) |
 |
FS Tool Series L52 FS Tool Carbide Tipped Saw Blade: XL4000 Panel Sizing Saw Blades, TCG Design: • Tooth configuration: TCG • Cutting material: TC XL4000 • Expansion slots: Cu plugged Application: • For sizing cuts in plastic laminated panels and plywood in sheets and stacks • On panel sizing saws (Beam Saws) |
|
FS Tool Series L6D FS Tool Carbide Tipped Saw Blade: Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side Design: • Tooth configuration: 3 beveled one side & 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately) Application: • For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit • On double cut-off machines and single or double end tenoners |
 |
FS Tool Series LHCF FS Tool Carbide Tipped Saw Blade: Chip-Free Melamine Trim Blades Design: • Tooth configuration: High ATB (30 degrees) • Cutting material: TC • Expansion slots: Laser, Self plug Application: • For chip free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring • For fine cross-cuts in solid woods • On table saws, sliding table saws, vertical panel sizing saws and cut-off saws |
 |
FS Tool Series LHCS FS Tool Carbide Tipped Saw Blade: Saw Blades For Cordless Machines Design: • Cutting material: TC • Expansion slots: laser, self plug Application: • For cross cutting solid wood, veneered and plastic laminated sheets • On portable machines |
 |
FS Tool Series LHFC FS Tool Carbide Tipped Saw Blade: Fine Cross Cut Saw Blades Design: • Cutting material: TC • Expansion slots: laser, self plug Application: • For fine cut-off and trimming of solid woods, plywood, wood veneered and plastic laminated panel materials • On portable machines and table saws |
|
FS Tool Series LHSC FS Tool Carbide Tipped Saw Blade: Mitre Joint Saw Blades, ATB Design: • Tooth configuration: 4 ATB & 1 Raker • Cutting material: TC • Expansion slots: CU plugged Application: • For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as P.V.C. substrates • For aluminum cuts see L1A, L1B, L1C series page E36, E37 • On single or double cut-off mitre machines and radial arm saws |
 |
FS Tool Series LM6-30° FS Tool Carbide Tipped Saw Blade: Chip-Free Melamine Trim Blades, High ATB (30°) Design: • Tooth configuration: High ATB (30°) • Cutting material: TC • Expansion slots: CU plugged Application: • For chip-free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring • For fine cross cuts in solid woods • On table saws, sliding table saws, vertical panel sizing saws and cut-off saws |
 |
FS Tool Series S04 FS Tool Carbide Tipped Saw Blade: XL4000 Fine Cross Cut Saw Blades, ATB Design: • Tooth configuration: ATB • Cutting material: TC XL4000 • Expansion slots: CU plugged Application: • For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials • On table saws, sliding table saws and cut-off saws |
 |
FS Tool Series S06 FS Tool Carbide Tipped Saw Blade: XL4000 Fine Cross Cut Saw Blades, ATB Design: • Tooth configuration: ATB • Cutting material: TC XL4000 • Expansion slots: CU plugged Application: • For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials • On table saws, sliding table saws and cut-off saws |
 |
FS Tool Series S10 FS Tool Carbide Tipped Saw Blade: XL4000 Fine Cross Cut Saw Blades, TCG Design: • Tooth configuration:TCG • Cutting material: TC XL4000 • Expansion slots: CU plugged Application: • For fine sizing cuts in single or double sided melamine panels, MDF, OSB and HDF panels • On table saws, sliding table saw and vertical panel sizing saws |
 |
FS Tool Series S19 FS Tool Carbide Tipped Saw Blade:XL4000 Cross Cut Saw Blades, TCG Design: • Tooth configuration: TCG • Cutting material: TC XL4000 • Expansion slots: CU plugged Application: • For cross cutting and ripping dry soft and hardwoods • On table saws, sliding table saws and cut-off saws |
 |
FS Tool Series S23 FS Tool Carbide Tipped Saw Blade: XL4000 Standard Cross Cut Saw Blades, TCG Design: • Tooth configuration: TCG • Cutting material: TC XL4000 • Expansion slots: CU plugged Application: • For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit • On table saws, sliding table saws and cut-off saws |
 |
FS Tool Series S4D FS Tool Carbide Tipped Saw Blade: XL4000 Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side Design: • Tooth configuration: 3 beveled one side and 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately) Application: • For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit • On double cut-off machines and single or double end tenoners |
 |
FS Tool Series S6D FS Tool Carbide Tipped Saw Blade: XL4000 Double Cut Off Saw Blades, 3 Beveled One Side And 1 Beveled Opposite Side Design: • Tooth configuration: 3 beveled one side and 1 beveled opposite side. Supplied in pairs 1 LH & 1 RH (order separately) Application: • For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit • On double cut-off machines and single or double end tenoners |
 |
FS Tool Series SM6-30° FS Tool Carbide Tipped Saw Blade: XL4000 Chip-Free Melamine Trim Blades, High ATB (30°) Design: • Tooth configuration: High ATB (30°) • Cutting material: TC XL4000 • Expansion slots: CU plugged Application: • For chip-free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring • For fine cross cuts in solid woods • On table saws, sliding table saws, vertical panel sizing saws and cut-off saws |
 |
FS Tool Series SS1 FS Tool Carbide Tipped Saw Blade: XL4000 Solid Surface Saw Blades, TC2 Design: • Tooth configuration: TC2 • Cutting material: TC XL4000 • Expansion slots: CU plugged Application: • For fine sizing cuts in single or double laminated panels, plexiglass and solid surface materials such as Wilsonart® Gibraltar®, SSV®; Corian®; Surell®; Avonite®; Fountainhead®, etc. • On table saws, sliding table saws, radial arm saws and vertical panel sizing saws |